Yard & Shop Supplies
Industry Specific Supplies for the Automotive Recycling & Dismantling and Automotive Related Industries.
-
Inductor Kit- Inductor Pro-Max Kit PM-20000
Pro-Max Features High performance/energy efficient induction heat inverter that maximizes use of a 120V/20A circuit Rated: input 2,200W, max output 2,000W Audible and visual power indicators Fine tuning linear power control Pneumatic foot switch (Resilient to dirt and water)
INDUCTION INNOVATIONS ENFORCES MINIMUM ADVERTISED PRICING "MAP". WE OFFER THIS ITEM BELOW MAP PRICING TO OUR CLIENTS. CONTACT US AT 800-233-0771 Learn More$1,899.05 -
Inductor Thermal Tape
The Thermal Tape (TT-01), a 10 piece strip of thermal tape replacement pads for the Glass Blaster attachment (U-311), U-Series Concentrator Attachment (U-411), I-300, and I-Series Concentrator Attachment (I-400).
Includes: One 10 piece strip of thermal tape replacement pads Learn More$6.00 -
Inductor Kit - Inductor Glass Blaster Kit
The Inductor Glass Blaster removes auto glass from outside the vehicle in minutes with no need to remove the interior trim because it releases urethane in hard-to-reach areas where other glass tools can't go. There is no damage to the encapsulant or frit. With the Glass Blaster, you can remove windshields in 15 minutes, back glass in 9 minutes, and quarter glass in 3 minutes. You can also remove spray-in bedliners in just a few hours.
INDUCTION INNOVATIONS ENFORCES MINIMUM ADVERTISED PRICING "MAP". WE OFFER THIS ITEM BELOW MAP PRICING TO OUR CLIENTS. CONTACT US AT 800-233-0771 Learn More$1,082.05 -
Inductor Cold Shield Thermal Spray Gel
Cold Shield Thermal Spray Gel (32 oz.) helps eliminate the possibility of over-heating painted surfaces and damaging rubber encapsulation when removing automotive glass with the Inductor Glass Blaster®. Includes One 32 oz. Thermal Spray Gel bottle Learn More$22.80 -
Inductor Kit - Inductor Max Kit
Features UL/CSA listed GFI protects entire unit for safety Storage for attachments Trouble-free pneumatic foot switch Audible and visual power indicators Inline connector resists tug damage offering best strain relief INDUCTION INNOVATIONS ENFORCES MINIMUM ADVERTISED PRICING "MAP". CONTACT US AT 800-233-0771 FOR PROMO PRICING Learn More$1,529.10 -
Inductor Mini Ductor® Venom
The Mini-Ductor Venom generates Invisible Heat® to release ferrous and some non-ferrous metals from corrosion and thread lock compounds without the dangers of open flame and up to 90% faster – 3/4" nuts are turned red hot in seconds. Learn More$569.05 -
Inductor Mini Ductor Standard Coil Kit
The Coil Kit is an accessory for the Mini-Ductor® Series and the Inductor® Series U-555. The kit enables you to heat and release seized nuts and bolts up to 1.5" in diameter and other metallic hardware from corrosion and thread lock compounds.
8 Heating Coils W/Storage Tube Learn More$141.55 -
Inductor Bellows & Hose
The Bellows & Hose is a replacement Bellows & Hose for use with the Max, Pro-Max & Glass Blaster®.
One Replacement Bellow & Hose (72" L)
Foot pedal to activate attachments
Learn More$25.65 -
Inductor L-Wedge
Heat Resistant L-Wedge Assists in the Removal of Automotive Glass when using the Inductor Glass Blaster and other Inductor Innovations glass removal systems.
Learn More$4.75 -
Inductor Glass Blaster U-Series Attachment
The U-Series Glass Blaster® Attachment (U-311) is an accessory for use with the Inductor® Pro-Max, Pro-Max CE and Max and is perfect for removing bonded auto glass, SMC panels, metal bond adhesives, undercoating and spray-on bedliners in a fraction of the time it takes using other tools. Learn More$312.55 -
Inductor Mini Ductor Essential Coil Kit
Coil Kit of the Most-used Smaller Diameter Coils
The Essential Coil Kit is a collection of essential coils for your Mini-Ductor® induction heater. The kit enables you to heat and release seized nuts, bolts and other metallic hardware from corrosion and thread lock compounds. The Essential Coil Kit is a collection of our most-used smaller diameter coils and are manufactured in an assortment of lengths and sizes to fit a variety of applications. Learn More$113.05 -
Inductor Mini Ductor Long Coil Kit
Long Coil Kit for Bolts up to 1 1/2"
The Long Coil Kit is an accessory for the Mini-Ductor® Series and the Inductor® Series U-555. The kit enables the user to heat and release seized nuts and bolts up to 1.5" in diameter and other metallic hardware from corrosion and thread lock compounds.
Learn More$174.80 -
Inductor Mini Ductor® II
The Mini-Ductor II generates Invisible Heat® to release ferrous and some non-ferrous metals from corrosion and thread lock compounds without the dangers of open flame and up to 90% faster – 3/4" nuts are turned red hot in seconds Learn More$474.05 -
Inductor Mini Ductor® 12 VOLT
The Mini-Ductor generates Invisible Heat® to release ferrous and some non-ferrous metals from corrosion and thread lock compounds without the dangers of open flame and up to 90% faster – 3/4" nuts are turned red hot in seconds.
Operates off of a 12 Volt Battery (Battery not included)
Learn More$664.05 -
Inductor Glass PDR U-Series Attachment
Paintless Dent Repair (PDR) Baton
Use to repair Hail Dents, Door Dings and Soft Dents
PDR Baton attachment w/102” cord & 8 pin connector for use w/Max & Pro-Max, head (molded polymer resin) (9”L x 1” Dia.) & 1 year warranty Learn More$179.55 -
Inductor Fast-Off Pad U-Series Attachment
FAST-OFF PAD
Use for removal of Side Moldings, Pinstriping and Adhesives
Fast-Off attachment (1.8 lb.), 8 pin connector w/74” cord for use on Max & Pro-Max, head (fiberglass pad w/reversible hook & loop straps) (8”L x 5.8”W x 0.8”H), & 1 year warranty. Learn More$265.05 -
Inductor Concentrator U-Series Attachment
U-Series Concentrator attachment for use with Inductor Max and Pro-Max . 8 pin connector w/72” cord for use on Max & Pro-Max, head (molded polymer resin head) Learn More$198.55 -
Inductor Rosebud U-Series Attachment
U-Series Rosebud attachment for use with Inductor Max and Pro-Max
Learn More$493.05 -
Inductor Mini Ductor® Venom HP
The Mini-Ductor Venom HP generates Invisible Heat® to release ferrous and some non-ferrous metals from corrosion and thread lock compounds without the dangers of open flame and up to 90% faster – 3/4" nuts are turned red hot in seconds. The Highest Powered Mini-Ductor Available Learn More$616.55 -
Inductor Mini Ductor Thin Wall Coil Kit
THIN WALL COIL KIT - 3/4"-1" Diameter Bolts Includes 4 Coils The Coil Kit is an accessory for the Mini-Ductor® Series and the Inductor® Series U-555. The Thin Wall Coil Pack offers four of the most popular sized coils and enables users to release rusted or corroded recessed lug nuts in a matter of seconds. Learn More$58.00 -
Inductor Mini Ductor U-Form Coil 23"
A straight heat resistant U-Form coil for D.I.Y. winding. For use with the Mini-Ductor product line 23" long MD99-602 Learn More$12.35 -
Inductor Mini Ductor Mini-Pad
The Mini-Pad is an attachment for the Mini-Ductor® Series induction heaters Quickly remove decals, graphics, pinstripes, emblems, and body side moldings by heating the ferrous metal underneath Learn More$75.05 -
Inductor Mini Ductor 1 1/2" Pre-formed Coil
1 1/2" I.D Pre-formed coil For use with the Mini-Ductor product line 8.5" L X 2" O.D. MD99-608 Learn More$20.43 -
Inductor Mini Ductor 1" Pre-formed Coil
1 " I.D Pre-formed coil For use with the Mini-Ductor product line 8.25" L X 1.75" O.D. MD99-610 Learn More$19.48 -
Inductor Mini Ductor 3/4" Pre-formed Coil
3/4" I.D Pre-formed coil For use with the Mini-Ductor product line 4.5" L X 1.25" O.D. MD99-611 Learn More$16.15 -
Inductor Mini Ductor 1" Long Pre-formed Coil
1 " I.D Pre-formed coil For use with the Mini-Ductor product line 13.25" L X 1.75" O.D. MD99-622 Learn More$22.80 -
Inductor Mini Ductor 3/4" Thin Wall Pre-formed Coil
3/4" I.D Thin Wall Pre-formed coil For use with the Mini-Ductor product line 8" L X 1.04" O.D. MD99-629 Learn More$16.63 -
Inductor Mini Ductor 13/16" Thin Wall Pre-formed Coil
13/16" I.D Thin Wall Pre-formed coil For use with the Mini-Ductor product line 8" L X 1.13" O.D. MD99-631 Learn More$16.63 -
Inductor Mini Ductor 7/8" Thin Wall Pre-formed Coil
7/8" I.D Thin Wall Pre-formed coil For use with the Mini-Ductor product line 8" L X 1.125" O.D. MD99-632 Learn More$16.63 -
Inductor Mini Ductor 1" Thin Wall Pre-formed Coil
1" I.D Thin Wall Pre-formed coil For use with the Mini-Ductor product line 8" L X 1.33" O.D. MD99-635 Learn More$16.63 -
Inductor Kit- Inductor Pro-Max Fully Loaded PM-200FL
The Pro-Max Fully Loaded is our Pro-Max induction heating system with the following ergonomically designed attachments, some molded in high temp, impact and chemical resistant epoxy polymers: U-555: with a design similar to the Mini-Ductor® but offering 40% more power, the U-555 leverages the power of the Pro-Max to instantly heat metallic objects, nuts/bolts, bearings, gears, pulleys, O2 sensors and more with an ergonomically slip-resistant, hand grenade style grip, and a super bright LED (coil kits are included) U-Series Rosebud (U-511): designed for the heavy duty needs of auto body professionals, used to heat frame rails, anneal aluminum panels for stress relieving, and heavy gauge steel heating U-Series Concentrator® (U-411): instantly heats nuts, bolts and all types of hardware red-hot in seconds and removes body caulking, seam sealers and hail dents; allows users to remove corroded hardware in seconds, and body caulking in minutes leaving a clean surface and spot welds intact U-Series Glass Blaster® (U-311): removes bonded glass, SMC panels, metal bond adhesives and spray-on bedliners; windshields can also be removed in less than 15 minutes, while spray-on bedliners in as little as a few hours U-Series Fast-Off® Pad (U-211): removes stripes, vinyl graphics, body side moldings, sound pads, vapor barriers, stress relieving sheet metal repairs and more. Literally saves hours on labor plus the added bonus on solvent-free removal as adhesive remains on graphic U-Series PDR Baton (U-111): unlike traditional PDR, induction heating is the cleanest and fastest way for fixing hail dents, door dings and other minor soft dents Heavy-Duty, custom Designed Cart: made of 22 gauge steel and powder coat finish to withstand the rigors of a body shop, can handle up to 300 lbs. and is covered by a life-time warranty Other products included are the (1) Cold Shield, (1) Standard Coil Kit, (1) Long Coil Kit, and (2) L-Wedges INDUCTION INNOVATIONS ENFORCES MINIMUM ADVERTISED PRICING "MAP". WE OFFER THIS ITEM BELOW MAP PRICING TO OUR CLIENTS. CONTACT US AT 800-233-0771 Learn More$3,719.00 -
Inductor Mini Ductor 1 3/4" Pre-formed Coil
1 3/4" I.D Pre-formed coil For use with the Mini-Ductor product line 8.75" L X 2.25" O.D. MD99-607 Learn More$22.00
