Windshield/Glass Removal
Auto glass removal tools and supplies. Master distributor of Equalizer and BTB.
-
Glass Removal - TightWire™ Gold Cut-Out Wire 72' Roll
TightWire™ is Composed of 3 super strong stainless steel wires braided to form one wire. 72' Per Roll. Premium Glass Cut-Out Wire. Learn More$4.35 -
Windshield Removal - Cut-Out Starter Kit TWK502
WINDSHIELD REMOVAL START-UP KIT
Kit includes one roll of 72' Gold cut-out wire, one pair of cut-out wire grips and one wirestarter. Learn More$29.23 -
Glass Removal - Equalizer Squire Cut-Out Wire 72' Roll
EQUALIZER "SQUIRE" WINDSHIELD CUT-OUT WIRE
Unique design made in Germany. As the square wire's flat side is drawn against the urethane, it tilts and begins cutting at a "V"-shaped angle.
1 - 72' Roll Per Package Learn More$11.95 -
Glass Removal - Cut-Out Wire - Tightwire Grips
Tightwire Grips - Hold cut-out wire quickly & securely. Learn More$21.56 -
Glass Removal - Cut-Out Wirestarter™ by Equalizer
Equalizer Wirestarter™ WS782
Allows for easy starting of Cutting Wire. Just push the hollow stainless steel tube through the urethane, insert the wire through the tube, pull the Wirestarter out and your wire is in. Learn More$8.25 -
Glass Removal - Center Start Wirestarter
Equalizer Centerstart is made of 1/16" spring steel and has a slot cut in the tip. To start the wire, place the wire in the slot and push the sharpened tip through the urethane. Learn More$18.05 -
Glass Removal - Cold Knife Equalizer GK380
The GK380 cold knife is made of the highest quality materials. It's stainless steel pull cable with fused end flute and large, easy-to-grasp aluminum pull handle is practically indestructible. Comes with one IS141B 1" cutting blade. Made in USA. Learn More$24.50 -
-
Utility - Utility Knife Blades Extra Long
Designed with more length between the two notches. Will fit most standard utility knives as well as all long knives that use a standard knife blade. Measures 3 3/4" 10 blades per pack Learn More$7.88 -
Equalizer Pipeknife SI1412
The Equalizer PipeKnife™ is 14" long and has a 6-1/2" flattened blade shaft with rounded corners. The PipeKnife™ can use all standard utility knife blades or Extra-Long Utility Knife Blades. Blades not included Learn More$24.75 -
Glass Handling Vacuum Cups - Pair
Comfortably and safely lift any piece of auto glass.
Designed for automotive use
Manufactured by Equalizer Learn More$88.32 -
Equalizer® Tools StingRay™ Glass Removal Tool Kit 120V
The Equalizer® StingRay™ has high torque, fast acceleration and a top end speed that is faster than any of our other Express® tools. The ergonomic design gives you a comfortable, natural grip. The low profile of the handle gives you clearance no matter which direction you are cutting and the rotating speed control allows for a wide range of speeds. Learn More$430.20 -
Equalizer® Tools Ambush™ Cordless 20 Volt Glass Removal Tool
The Equalizer® Ambush™ is designed to cut through the toughest urethane.
A heavy-duty 20-Volt motor provides the power to quickly remove the most difficult glass with the convenience of the battery.
It has a rubber over molded comfort grip and a quick release blade clamp.
Learn More$895.00 -
Equalizer® Express® Blades 3" X 10" #BFE1400
The BFE1400 is the most used size and is perfect for slicing through wide bands of urethane. It works well in all places where you need to plunge cut or angle cut.
This blade can also be used with our Express® Blade Handle or PushKnife.
Made of a proprietary grade of stainless steel.
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
These blades are designed for the Equalizer Express Line of Glass Removal Tools and will not work in tools other than Equalizer Ambush™, Black-Ops™, BlackHawk™, Big Dawg™, StingRay™ or Express™ 360 Learn More$47.85 -
Equalizer® Express® Blades 1 1/2" X 10" #BFE1401
The BFE1401 is the most widely used size and is perfect for slicing through wide bands of urethane. It works well in all areas where plunge cut or angle cut are used.
This blade can also be used with our Express® Blade Handle or PushKnife.
Made of a proprietary grade of stainless steel.
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
These blades are designed for the Equalizer Express Line of Glass Removal Tools and will not work in tools other than Equalizer Ambush™, Black-Ops™, BlackHawk™, Big Dawg™, StingRay™ or Express™ 360 Learn More$47.85 -
Equalizer® Express HydroBlades™ 3" X 10" #EHB186
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
These blades are designed for the Equalizer Express Line of Glass Removal Tools and will not work in tools other than Equalizer Ambush™, Black-Ops™, BlackHawk™, Big Dawg™, StingRay™ or Express™ 360 Learn More$47.85 -
Equalizer® Express HydroBlades™ 1 1/2" X 10" #EHB145
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
These blades are designed for the Equalizer Express Line of Glass Removal Tools and will not work in tools other than Equalizer Ambush™, Black-Ops™, BlackHawk™, Big Dawg™, StingRay™ or Express™ 360 Learn More$47.85 -
Equalizer® Cutting Lubricant 8 oz Bottle Concentrate
Using our lubricant improves cutting action and reduces drag on the blade. Mix at a 16 to 1 ratio (16 parts water to 1 part cutting lubricant) to make 128 ounces of cutting lubricant. Learn More$9.49 -
Equalizer® Express® Blades 3" X 12" #LBE1402
Equalizer® Express® Blades are developed for use on hundreds of different vehicles. The LBE1402 work well where the urethane is far below the glass, but there is a limited amount of vertical space inside the vehicle. Made of a proprietary grade of stainless steel.
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
These blades are designed for the Equalizer Express Line of Glass Removal Tools and will not work in tools other than Equalizer Ambush™, Black-Ops™, BlackHawk™, Big Dawg™, StingRay™ or Express™ 360 Learn More$47.85 -
Equalizer® Express® Blades 1 1/2" X 12" #LBE1403
The LBE1403 blade is perfect for removing glass that is not broken. Its narrow width is more flexible, which puts less stress on the glass. This blade can also be used with our Express® Blade Handle or PushKnife.
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
These blades are designed for the Equalizer Express Line of Glass Removal Tools and will not work in tools other than Equalizer Ambush™, Black-Ops™, BlackHawk™, Big Dawg™, StingRay™ or Express™ 360 Learn More$47.85 -
Equalizer® Express® Blades 3" X 14" #RLE1404
The RLE1404 work well where the urethane is very deep below the dash. This blade can also be used with our Express® Blade Handle or PushKnife.
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
These blades are designed for the Equalizer Express Line of Glass Removal Tools and will not work in tools other than Equalizer Ambush™, Black-Ops™, BlackHawk™, Big Dawg™, StingRay™ or Express™ 360 Learn More$47.85 -
Equalizer® Express HydroBlades™ 1 1/2" X 12" #EHL146
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
These blades are designed for the Equalizer Express Line of Glass Removal Tools and will not work in tools other than Equalizer Ambush™, Black-Ops™, BlackHawk™, Big Dawg™, StingRay™ or Express™ 360 Learn More$47.85 -
Equalizer® Express HydroBlades™ 3" X 12" #EHL187
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
These blades are designed for the Equalizer Express Line of Glass Removal Tools and will not work in tools other than Equalizer Ambush™, Black-Ops™, BlackHawk™, Big Dawg™, StingRay™ or Express™ 360 Learn More$47.85 -
Equalizer® Express HydroBlades™ 3" X 14" #EHE160
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
These blades are designed for the Equalizer Express Line of Glass Removal Tools and will not work in tools other than Equalizer Ambush™, Black-Ops™, BlackHawk™, Big Dawg™, StingRay™ or Express™ 360 Learn More$47.85 -
Equalizer® Express HydroBlades™ Passenger Narrow Quarter and Corner Glass Blade 1-3/8" X 12" #HQS176
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
These blades are designed for the Equalizer Express Line of Glass Removal Tools and will not work in tools other than Equalizer Ambush™, Black-Ops™, BlackHawk™, Big Dawg™, StingRay™ or Express™ 360 Learn More$47.85 -
Equalizer® Express HydroBlades™ Driver Side Narrow Quarter and Corner Glass Blade 1-3/8" X 12" #HQS177
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
These blades are designed for the Equalizer Express Line of Glass Removal Tools and will not work in tools other than Equalizer Ambush™, Black-Ops™, BlackHawk™, Big Dawg™, StingRay™ or Express™ 360 Learn More$47.85 -
Equalizer® Bullet™ Blade 1-1/2" X 12" #REL261
Bullet™ Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze. This blade can also be used with our Express® Blade Handle or PushKnife. Made of a proprietary grade of stainless steel.
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
These blades are designed for the Equalizer Express Line of Glass Removal Tools and will not work in tools other than Equalizer Ambush™, Black-Ops™, BlackHawk™, Big Dawg™, StingRay™ or Express™ 360 Learn More$47.85 -
Equalizer® Bullet™ Blade 3" X 12" #REL263
Bullet™ Blades are elongated, rounded blades designed to cut from all angles.
Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.
This blade can also be used with our Express® Blade Handle or PushKnife.
Made of a proprietary grade of stainless steel.
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
These blades are designed for the Equalizer Express Line of Glass Removal Tools and will not work in tools other than Equalizer Ambush™, Black-Ops™, BlackHawk™, Big Dawg™, StingRay™ or Express™ 360 Learn More$47.85 -
Equalizer® Bullet™ Blade 3" X 10" #REB262
Bullet™ Blades are elongated, rounded blades designed to cut from all angles.
Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.
This blade can also be used with our Express® Blade Handle or PushKnife.
Made of a proprietary grade of stainless steel.
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
These blades are designed for the Equalizer Express Line of Glass Removal Tools and will not work in tools other than Equalizer Ambush™, Black-Ops™, BlackHawk™, Big Dawg™, StingRay™ or Express™ 360 Learn More$47.85 -
Equalizer® Bullet™ Blade 3" X 14" #REE264
Bullet™ Blades are elongated, rounded blades designed to cut from all angles.
Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.
This blade can also be used with our Express® Blade Handle or PushKnife.
Made of a proprietary grade of stainless steel.
Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.
These blades are designed for the Equalizer Express Line of Glass Removal Tools and will not work in tools other than Equalizer Ambush™, Black-Ops™, BlackHawk™, Big Dawg™, StingRay™ or Express™ 360 Learn More$47.85 -
Equalizer® Tools Black-Ops™ Glass Removal Tool Kit 120V
Our sleek Black-Ops™ has a compact design measuring only 14.5” in length for easy access to tight areas and more flexibility of applications. It’s also lightweight and has an ergonomic design with a soft grip handle and boot area to provide additional comfort and reduce vibration. With the powerful motor, Black-Ops™ will cut through the thickest of urethane with ease. Learn More$564.03 -
Equalizer® Express® Blade Sharpener
Express® Blade Sharpener Retain the chisel edge on your Express® Blades! To get the best performance, it is important to put a good edge on the blade every time you use your auto glass cut-out knife. You can sharpen the blade in about 10 seconds by dragging the sharpener across the blade 3 or 4 times. All off-the-shelf sharpeners will put a V-type edge on the blade and this type of sharpening can prevent the tool from working properly. Our Express® Blade Sharpener puts the chisel-type edge on the blade and keeps your auto glass cut-out knife operating at peak performance. It also features a built-in protector to keep you from cutting your hand on the blade. Learn More$17.10 -
-
Equalizer® Tools Glass Removal Startup Kit
Glass Removal Start-Up Kit Includes the Viper™ Wire Removal System The New Equalizer Glass Removal Start-Up Kit. It comes with everything a new technician will need to remove auto glass and prep the area for replacement. This includes the Viper™ Wire Removal System as well as many other industry-specific tools. This kit is intended to build on a basic set of tools that most people into the auto glass in already have and make it into a set of tools for an Auto Glass Technician. Learn More$963.00 -
Equalizer® Tools EQUALIZER® VIPER™ Glass Removal Kit
The Equalizer® Viper™ is a cord and wire removal device designed for small quarter glass removals, but can also be used on windshields and back glasses. The double direction capability of the reel allows for optimum use and the magnetic points on the ratchet shaft ensure that your ratchet stays firmly attached to the tool, even in steep and vertical scenarios. Learn More$623.92 -
Equalizer® TIMESAVER™ Blade 5 1/2"
Equalizer® TimeSaver™ Blades will cut urethane cleanly from inside the vehicle and are thinner than most blades on the market. All TimeSaver™ Blades are made of hardened, stainless steel and can be easily re-sharpened dozens of times If the tool is not yellow, then do not use the blades in the tool 5 1/2" Blade Made in the USA. Learn More$37.98 -
Equalizer® TIMESAVER™ Tool
A heavy-duty oscillating pneumatic tool that uses a wide side-to-side cutting action to slice through the thickest urethane.
Equalizer® TimeSaver™ is a heavy-duty oscillating pneumatic tool that uses a wide, side-to-side cutting action to slice through the thickest of urethane beads Learn More$212.40 -
Equalizer® Tools EQUALIZER® RAPTOR™ Glass Removal Kit
Equalizer® Raptor™ is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce™ Constant Vacuum Cups. This technology has been specifically developed by Equalizer® to create a quick placement and constant vacuum to the glass so the Raptor™ stays in place and resists sliding. Learn More$1,026.96 -
Equalizer® Extractor® Blade 7 3/4"
Extractor Delta Blade 7 3/4" Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. Learn More$41.75 -
Equalizer® Extractor® Blade 9"
Extractor Delta Blade 9" Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. Learn More$48.05 -
Glass Removal - Equalizer Squire2™ Cut-Out Wire 72' Roll
EQUALIZER "Squire2™" WINDSHIELD CUT-OUT WIRE
Diameter is .055 mm and measures 72' (22M) long. Engineered to cut through the newest, toughest, and widest urethane. Additionally, it will slice right through plastic clips and setting posts that are now being used by automobile manufacturers to place the windshield in the exact position necessary for a perfect fit at the factory. Learn More$15.16 -
Glass Removal - RipCord™ HD Reusable Auto Glass Cord, 100' Roll
Slices windshield clips and posts.
Reusable up to 10 jobs per section.
Won’t damage paint finishes.
Made in the USA.
100' Length. Learn More$41.10
